New flagship UltiMaker S7 3D printer launched: technical specs and pricing


Desktop 3D printer producer UltiMaker has rolled out the most recent mannequin from its best-selling S-Collection vary: the UltiMaker S7. 

UltiMaker’s first new S-Collection because the merger of Ultimaker and MakerBot final yr, packs an upgraded construct plate sensor and air filtration capabilities, making it extra correct than its predecessors. Due to its upgraded mattress leveling performance, the S7 can be mentioned to allow improved first-layer adhesion, in a method that enables customers to print on its 330 x 240 x 300 mm construct plate with higher confidence.

“Over 25,000 prospects innovate with the UltiMaker S5 daily, making the award-winning machine one of many market’s most used skilled 3D printers,” mentioned UltiMaker CEO Nadav Goshen. “With the S7, we took the whole lot our prospects cherished in regards to the S5 and made it even higher.” 

Fused Filament Fabrication at UltiMaker 

Even earlier than its merger with ex-Stratasys subsidiary MakerBot in 2022, Ultimaker had already established itself a robust repute for growing versatile desktop 3D printers. In 2018, the corporate launched the Ultimaker S5, which till the introduction of the S7, was its flagship 3D printer. Although initially designed for dual-extruding composites, the S5 has since benefited from a number of upgrades, together with a Metallic Growth Equipment that permits customers to print with 17-4 PH chrome steel.

Over the past 5 years, the S5’s versatility has seen it adopted by a wide range of main manufacturers, together with Ford, Siemens, L’Oréal, Volkswagen, Zeiss, Decathlon, and extra. On the appliance entrance, Materialise, has additionally managed to check the S5 in medical 3D printing use circumstances, whereas ERIKS has developed a workflow that’s able to assembly meals security requirements with the S5

For its half, MakerBot was already a identified amount in desktop 3D printing as effectively. Forward of its merger with Ultimaker, the corporate was greatest identified for its METHOD merchandise. As revealed in 3D Printing Business’s METHOD-X overview, the machines are able to creating components sturdy sufficient for end-use, and the likes of the Arash Motor Firm now use them to 3D print bespoke hypercar parts

When Ultimaker and MakerBot first got here collectively, it was introduced that their companies would pool sources to turn out to be a consolidated entity, and because the deal was wrapped up, the newly-merged UltiMaker has already launched the MakerBot SKETCH Giant. That mentioned, with the S7, the enterprise is now providing a glimpse into the place it intends to take the S-Collection model shifting forwards. 

The integrated air manager included in UltiMaker's S7 3D printer. Image via UltiMaker.
The built-in air supervisor included in UltiMaker’s S7 3D printer. Picture through UltiMaker.

UltiMaker’s new flagship 3D printer 

With the S7, UltiMaker has launched a system that’s full of new options, designed to make it each accessible and able to reliably churning out components. Headline additions embody an inductive construct plate sensor that’s mentioned to probe the construct space with much less noise and higher accuracy. The system’s computerized tilt compensation performance additionally means customers don’t need to calibrate the S7’s mattress with a thumbscrew, making the duty of mattress leveling much less formidable to new adopters. 

In one other improve, UltiMaker has built-in a brand new air supervisor into the system, which in impartial testing has confirmed able to eradicating as much as 95% of ultrafine particles from every print. This not offers customers with peace of thoughts that air across the machine is being correctly filtered, however due to its totally enclosed construct chamber and single glass door, it additionally allows a lift in total print high quality. 

Elsewhere, UltiMaker has fitted its newest S-Collection unit with a PEI-coated versatile construct plate that enables adopters to effortlessly take away components, whereas avoiding the usage of glue. What’s extra, resulting from its whopping 25 magnets and 4 alignment pins, the mattress will be rapidly and exactly changed, accelerating a process that may typically be a time sink. 

So, how does the S7 stack up towards the S5? Ultimaker has made a concerted effort to retain the perfect options of its predecessor within the S7. The agency’s new machine shouldn’t be solely backwards suitable, nevertheless it’s capable of print with the identical library of over 280 supplies as earlier than, and its upgraded capabilities are already mentioned to have been examined in-house by polymer builders Polymaker and igus with glowing outcomes. 

“As extra prospects are utilizing 3D printing to develop and innovate their enterprise, our objective is to offer them with an entire resolution to achieve success,” added Goshen. “With the brand new S7, prospects will be setup and operating in minutes: managing printers, customers, and designs with our Digital Manufacturing facility software program, bettering their 3D printing information with e-learning programs on the UltiMaker Academy, and selecting from lots of of supplies and plugins utilizing the UltiMaker Cura Market.”

The new UltiMaker S7 3D printer. Image via UltiMaker.
The brand new UltiMaker S7 3D printer. Picture through UltiMaker.

Technical specs and pricing 

Under are the technical specs for the UltiMaker S7 3D printer. At launch, pricing info hasn’t been made public, however these desirous about buying the machine can contact UltiMaker for a quote right here

Expertise  Fused filament fabrication (FFF)
Construct Quantity  330 x 240 x 300 mm
Feeder Sort  Twin-gear Feeder
Filament Diameter 2.85 mm
XYZ Decision  6.9, 6.9, 2.5 micron
Nozzle Diameter  180 – 280 °C
Dimensions 495 x 585 x 800 mm 
Weight  29.1 kg 
Most Energy Ouput  500W 
File Switch  Wi-Fi (2.4 and 5 GHz), Ethernet, USB

To remain updated with the most recent 3D printing information, don’t overlook to subscribe to the 3D Printing Business e-newsletter or observe us on Twitter or liking our web page on Fb.

When you’re right here, why not subscribe to our Youtube channel? that includes dialogue, debriefs, video shorts and webinar replays.

Are you searching for a job within the additive manufacturing trade? Go to 3D Printing Jobs for a collection of roles within the trade.

Featured picture reveals the brand new UltiMaker S7 3D printer. Picture through UltiMaker.